Page 1 :
A, , beam of width 250 mm and d, 450 mm, reinforced with Ast 3- #16 mm, the beam, =, , =, , Subjected, , to, , bending, , moment, , 30 kNm, , determine the stresses in steel and concrete., , Avm, , melo.9, , is, is

Page 2 :
Determine the moment of resistance of a singly reinforced 160 mm wide, and 300 mm u p (effective) beam. The reinforcement consists of 4 bars of 16 mm diameter., The material used is M15 concrete and Fe 250 steel. Take m = 18., , can, , If the span of the the beam is 5 m, find the maximum distributed load which the beam, carry, inclusive of its own weight.

Page 3 :
mm, , of 300, R.C.C. cantilever beam, Use M20, mm diameter., reinforced with 2 bars of 16, ot the, its self weight, if the span, , Find the moment of resistance of, , an, , effective depth,, concrete and Fe 415 steel. Also find the safe load, including, wIdth and, , beam is 2, , 500, , m., , mm

Page 4 :
An R.C.C. beam 400, , 25, , mm, , diameier. The beam is subjected, , up in steel and concrete, if, , m, , =, , 13.33., , to, , x, , a, , 600, , effective is reinforced with 4 bars of, bending moment 150 kNm. Find the stresses set, mm

Page 5 :
An R.C.C. beam 300 mm x 640 mm overall is reinforced with 4 bars of, 20 mm diameter. The beam has to carry a superimposed load of 50 kN/m,, weight of the beam, over an effective span of 4 m. Find the actual stresses developed in steel, and concrete. The effective cover is 40 mm. Take m = 13.33., find the compressive stress in concrete at 50 mm from top of the beam and draw, , including the self, , Also,, bending stress diagram.

Page 6 :
A rectangular beam of 300 mm width and 500 mm effective depth is, in the top, reinforced with 4x 16 mm dia., it, is, subjected to a moment of, fibre of the concrete and tension steel when, , compression, , 50 kNm. Use M20 concrete., , tension bars. Determine the stress induced

Page 7 :
rectangular beam of width 350 mm is subjected to a uniformly distributed, load of 15 kN/m over an effective span of 8 m. Determine the depth required for the beam, and Fe 250, and also calculate the area of tensile reinforcement required. Use M20 concrete, A