Page 1 :
TOPPER’S HANDWRITTEN NOTES, , EXPLORE AND LEARN
Page 2 :
CLICK HERE TO DOWNOAD COMPLETE, STUDY MATERILAS IN FREE OF COST, CLICK HERE FOR HANDWRITTEN NOTES
Page 3 :
Chapter 7, System of Particles and Rotational Motion, , 1 Marks Questions, 1.A wheel 0.5m in radius is moving with a speed of 12m/s. find its angular speed?, Ans:, , 2.State the condition for translational equilibrium of a body?, Ans:For translations equilibrium of a body the vector sum of all the forces acting on the body, must be zero., , 3.How is angular momentum related to linear momentum?, Ans:, , Where, , is the angle between, , 4.What is the position of the centre of mass of a uniform triangular lamina?, Ans:At the centroid of the triangular lamina., 5.What is the moment of inertia of a sphere of mass 20, , diameter?, Ans:, , I = 0.5kgm2, , and radius, , about its
Page 4 :
6.What are the factors on which moment of inertia of a body depends?, Ans: (1) Mass of the body, (2) Shape and size of the body, (3) Position of the axis of rotation, , 7.Two particles in an isolated system under go head on collision. What is the, acceleration of the centre of mass of the system?, Ans: Acceleration is zero as force, are internal forces., , 8.Which component of a force does not contribute towards torque?, Ans: The radial component of a force does not contribute towards torque., , 9.What is the position of centre of mass of a rectangular lamina?, Ans: The centre of mass of a rectangular lamina is the point of intersection of diagonals., , 10. Give the location of the centre of mass of a (i) sphere, (ii) cylinder, (iii) ring, and (iv), cube, each of uniform mass density. Does the centre of mass of a body necessarily lie, inside the body?, Ans.Geometric centre; No, , The centre of mass (C.M.) is a point where the mass of a body is supposed to be concentrated., For the given geometric shapes having a uniform mass density, the C.M. lies at their, respective geometric centers., The centre of mass of a body need not necessarily lie within it. For example, the C.M. of, bodies such as a ring, a hollow sphere, etc., lies outside the body.
Page 5 :
11. A child sits stationary at one end of a long trolley moving uniformly with a speed V, on a smooth horizontal floor. If the child gets up and runs about on the trolley in any, manner, what is the speed of the CM of the (trolley + child) system?, Ans. No change, The child is running arbitrarily on a trolley moving with velocity v. However, the running of, the child will produce no effect on the velocity of the centre of mass of the trolley. This is, because the force due to the boy's motion is purely internal. Internal forces produce no effect, on the motion of the bodies on which they act. Since no external force is involved in the boytrolley system, the boy's motion will produce no change in the velocity of the centre of mass, of the trolley., , 12. To maintain a rotor at a uniform angular speed of 200 rad, , , an engine needs to, , transmit a torque of 180 Nm. What is the power required by the engine?, (Note: uniform angular velocity in the absence of friction implies zero torque. In, practice, applied torque is needed to counter frictional torque). Assume that the engine, is 100 % efficient., Ans. Angular speed of the rotor,, Torque required,, , = 200 rad/s, , = 180 Nm, , The power of the rotor (P) is related to torque and angular speed by the relation:, P=, = 180, , 200 = 36, , 103, , = 36 kW, Hence, the power required by the engine is 36 kW.
Page 6 :
2 Marks Questions, 1.A planet revolves around on massive star in a highly elliptical orbit is its angular, momentum constant over the entire orbit. Give reason?, Ans: A planet revolves around the star under the effect of gravitational force since the force, is radial and does not contribute towards torque. Thus in the absence of an external torque, angular momentum of the planet remains constant., , 2.Obtain the equation, , ?, , Ans:Since, , Integrating within the limits, , 3.What is the torque of the force, , about the origin?, Ans:, , acting at the point
Page 7 :
4.What is the value of linear velocity if, , Ans:, , 5.Establish the third equation of rotational motion, , Ans:, , Multiply and divide by, , Integrating we get, , Hence prove.
Page 8 :
6.Find the expression for radius of gyration of a solid sphere about one of its diameter?, Ans:M.I of a solid sphere, About its diameter =, , K = Radius of Gyration, , 7.Prove that the centre of mass of two particles divides the line joining the particles in, the inverse ratio of their masses?, , Ans:, , If centre of mass is at the origin, , In terms of magnitude
Page 9 :
8.Show that cross product of two parallel vectors is zero?, Ans:, , If, , and, , are parallel to each other, , 9.Prove the relation, , Ans:We know, , Differentiating wrt. Time, , From (1) and (2), , 10.Show that for an isolated system the centre of mass moves with uniform velocity, along a straight line path?, Ans: Let, , be the total mass concentrated at centre of mass whose position vector is
Page 10 :
For an isolated system, , 11.The angle θ covered by a body in rotational motion is give by the equation θ = 6t + 5t2, + 2t3. Determine the value of instantaneous angular velocity and angular acceleration, at time t = 2S., Ans:, Angular velocity, , Again angular acceleration
Page 11 :
12. A solid cylinder of mass 20 kg rotates about its axis with angular speed 100 rad, , The radius of the cylinder is 0.25 m. What is the kinetic energy associated with the, rotation of the cylinder? What is the magnitude of angular momentum of the cylinder, about its axis?, Ans.Mass of the cylinder, m= 20 kg, Angular speed,, , = 100 rad, , Radius of the cylinder, r= 0.25 m, The moment of inertia of the solid cylinder:, , ∴Kinetic energy, , =, , ∴Angular momentum, L= I, = 6.25, = 62.5 Js, , 100, , .
Page 12 :
13. A rope of negligible mass is wound round a hollow cylinder of mass 3 kg and radius, 40 cm. What is the angular acceleration of the cylinder if the rope is pulled with a force, of 30 N? What is the linear acceleration of the rope? Assume that there is no slipping., Ans.Mass of the hollow cylinder, m= 3 kg, Radius of the hollow cylinder, r= 40 cm = 0.4 m, Applied force, F = 30 N, The moment of inertia of the hollow cylinder about its geometric axis:, I=, , =, Torque,, = 30, , 0.4 = 12 Nm, , For angular acceleration, , , torque is also given by the relation:, , Linear acceleration = rα= 0.4, , 25 = 10 m, , 14. A bullet of mass 10 g and speed 500 m/s is fired into a door and gets embedded, exactly at the centre of the door. The door is 1.0 m wide and weighs 12 kg. It is hinged at, one end and rotates about a vertical axis practically without friction. Find the angular, speed of the door just after the bullet embeds into it.
Page 13 :
(Hint: The moment of inertia of the door about the vertical axis at one end is, , Ans. Mass of the bullet, m= 10 g =, , Velocity of the bullet, v= 500 m/s, Thickness of the door, L= 1 m, Radius of the door,, , Mass of the door, M= 12 kg, Angular momentum imparted by the bullet on the door:, α =mvr, , …….(i), Moment of inertia of the door:, , =, But, , .)
Page 14 :
15. Explain why friction is necessary to make the disc in Fig. 7.41 roll in the direction, indicated., (a) Give the direction of frictional force at B, and the sense of frictional torque, before, perfect rolling begins., (b) What is the force of friction after perfect rolling begins?, Ans. A torque is required to roll the given disc. As per the definition of torque, the rotating, force should be tangential to the disc. Since the frictional force at point B is along the, tangential force at point A, a frictional force is required for making the disc roll., (a) Force of friction acts opposite to the direction of velocity at point B. The direction of, linear velocity at point B is tangentially leftward. Hence, frictional force will act tangentially, rightward. The sense of frictional torque before the start of perfect rolling is perpendicular, to the plane of the disc in the outward direction., (b) Since frictional force acts opposite to the direction of velocity at point B, perfect rolling, will begin when the velocity at that point becomes equal to zero. This will make the frictional, force acting on the disc zero.
Page 15 :
3 Marks Questions, 1.The moment of inertia of a solid sphere about a tangent is, , . Find the moment, , of inertia about a diameter?, , Ans: A tangent KCl is drawn at pt. C of a solid sphere of mass M and radius R. Draw a, diameter AOB || to KCl., Then according to Theorem of parallel axis, I, = I + M (OC)2, I1(M.I about the tangent) =, , 2.Four particles of mass 1kg, 2kg, 3kg and 4kg are placed at the four vertices A, B, C and, D of square of side 1m. Find the position of centre of mass of the particle.
Page 16 :
Ans:Hence, , Thus centre of mass (0.5m, 0.7m), , 3.A circular ring of diameter 40cm and mass 1kg is rotating about an axis normal to its, plane and passing through the centre with a frequency of 10 rotations per second., Calculate the angular momentum about its axis of rotation?
Page 17 :
Ans:, , 4.(a) Which physical quantities are represented by the, (i) Rate of change of angular momentum, (ii) Product of I and, , (b) Show that angular momentum of a satellite of mass MS revolving around the earth, having mass Me in an orbit of radius r is equal to, , Ans:(a) (1) Torque i.e., (2) Angular momentum i.e. L = Iw, (b) Mass of satellite = Ms, Mass of earth = Me, Radius of satellite = r, Required centripetal force, Where, , is the orbital velocity with which the satellite revolves round the earth., , Gravitational force between the satellite and the earth
Page 18 :
Equating (1) and (2), , Now angular momentum of the satellite, , Hence Proved, , 5. In the HCl molecule, the separation between the nuclei of the two atoms is about 1.27, . Find the approximate location of the, CM of the molecule, given that a chlorine atom is about 35.5 times as massive as a, hydrogen atom and nearly all the mass of an atom is concentrated in its nucleus., Ans.The given situation can be shown as:, , Distance between H and Cl atoms = 1.27, Mass of H atom = m, Mass of Cl atom = 35.5m, Let the centre of mass of the system lie at a distance x from the Cl atom., Distance of the centre of mass from the H atom = (1.27 – x), Let us assume that the centre of mass of the given molecule lies at the origin. Therefore, we, can have:
Page 19 :
Here, the negative sign indicates that the centre of mass lies at the left of the molecule., Hence, the centre of mass of the HCl molecule lies 0.037, , from the Cl atom., , 6. Show that the area of the triangle contained between the vectors a and b is one half, of the magnitude of a x b., Ans.Consider two vectors, , following figure., , In ΔOMN, we can write the relation:, , = 2 × Area of ΔOMK, ∴Area of ΔOMK, , and, , , inclined at an angle θ, as shown in the
Page 20 :
7. A metre stick is balanced on a knife edge at its centre. When two coins, each of mass 5, g are put one on top of the other at the 12.0 cm mark, the stick is found to be balanced, at 45.0 cm. What is the mass of the metre stick?, Ans. Let W and, , be the respective weights of the metre stick and the coin., , The mass of the metre stick is concentrated at its mid-point, i.e., at the 50 cm mark., Mass of the meter stick =, Mass of each coin, m= 5 g, When the coins are placed 12 cm away from the end P, the centre of mass gets shifted by 5, cm from point R toward the end P. The centre of mass is located at a distance of 45 cm from, point P., The net torque will be conserved for rotational equilibrium about point R., , Hence, the mass of the metre stick is 66 g.
Page 21 :
4 Marks Questions, 1. Show that a.(b, , c) is equal in magnitude to the volume of the parallelepiped, , formed on the three vectors, a, b and c., Ans. A parallelepiped with origin O and sides a, b, and c is shown in the following figure., , Volume of the given parallelepiped = abc, , Let, , be a unit vector perpendicular to both band c. Hence,, , and a have the same direction., , ∴, , = abc cosθ, , = abc cos 0°, = abc, = Volume of the parallelepiped., , 2. A hoop of radius 2 m weighs 100 kg. It rolls along a horizontal floor so that its centre, of mass has a speed of 20 cm/s. How much work has to be done to stop it?
Page 22 :
Ans. Radius of the hoop, r= 2 m, Mass of the hoop, m= 100 kg, Velocity of the hoop, v= 20 cm/s = 0.2 m/s, Total energy of the hoop = Translational KE + Rotational KE, , Moment of inertia of the hoop about its centre, I =, , But we have the relation,, , The work required to be done for stopping the hoop is equal to the total energy of the hoop., ∴Required work to be done,, , 3. The oxygen molecule has a mass of, , kg and a moment of inertia of, , about an axis through its centre perpendicular to the lines joining, the two atoms. Suppose the mean speed of such a molecule in a gas is 500 m/s and that, its kinetic energy of rotation is two thirds of its kinetic energy of translation. Find the, average angular velocity of the molecule.
Page 23 :
Ans. Mass of an oxygen molecule, m=, , kg, , Moment of inertia, I=, , Velocity of the oxygen molecule, v= 500 m/s, The separation between the two atoms of the oxygen molecule = 2r, Mass of each oxygen atom =, , Hence, moment of inertia I, is calculated as:, , It is given that:, , =
Page 24 :
4. A man stands on a rotating platform, with his arms stretched horizontally holding a, 5 kg weight in each hand. The angular speed of the platform is 30 revolutions per, minute. The man then brings his arms close to his body with the distance of each weight, from the axis changing from 90cm to 20cm. The moment of inertia of the man together, with the platform may be taken to be constant and equal to 7.6 kg, , ., , (a) What is his new angular speed? (Neglect friction.), (b) Is kinetic energy conserved in the process? If not, from where does the change come, about?, Ans. (a) 58.88 rev/min (b) No, (a)Moment of inertia of the man-platform system = 7.6 kg, Moment of inertia when the man stretches his hands to a distance of 90 cm:, , =, = 8.1 kg, Initial moment of inertia of the system,, Angular speed,, , Angular momentum,, , …………(i), , Moment of inertia when the man folds his hands to a distance of 20 cm:, , =, , = 0.4 kg, , Final moment of inertia,, , Final angular speed =, Final angular momentum,, , … (ii)
Page 25 :
From the conservation of angular momentum, we have:, , (b) Kinetic energy is not conserved in the given process. In fact, with the decrease in the, moment of inertia, kinetic energy increases. The additional kinetic energy comes from the, work done by the man to fold his hands toward himself., , 5. Read each statement below carefully, and state, with reasons, if it is true or false;, (a) During rolling, the force of friction acts in the same direction as the direction of, motion of the CM of the body., (b) The instantaneous speed of the point of contact during rolling is zero., (c) The instantaneous acceleration of the point of contact during rolling is zero., (d) For perfect rolling motion, work done against friction is zero., (e) A wheel moving down a perfectly frictionless inclined plane will undergo slipping, (not rolling) motion., Ans. (a) False, Frictional force acts opposite to the direction of motion of the centre of mass of a body. In the, case of rolling, the direction of motion of the centre of mass is backward. Hence, frictional, force acts in the forward direction., (b) True, Rolling can be considered as the rotation of a body about an axis passing through the point of, contact of the body with the ground. Hence, its instantaneous speed is zero.
Page 26 :
(c) False, When a body is rolling, its instantaneous acceleration is not equal to zero. It has some value., (d) True, When perfect rolling begins, the frictional force acting at the lowermost point becomes zero., Hence, the work done against friction is also zero., (e) True, The rolling of a body occurs when a frictional force acts between the body and the surface., This frictional force provides the torque necessary for rolling. In the absence of a frictional, force, the body slips from the inclined plane under the effect of its own weight., , 6. Two particles, each of mass m and speed v, travel in opposite directions along, parallel lines separated by a distance d. Show that the vector angular momentum of the, two particle system is the same whatever be the point about which the angular, momentum is taken., Ans. Let at a certain instant two particles be at points P and Q, as shown in the following, figure., , Angular momentum of the system about point P:, , ……….(i), Angular momentum of the system about point, , …………….(ii), , :
Page 27 :
Consider a point R, which is at a distance y from point Q, i.e.,, QR = y, ∴PR = d – y, Angular momentum of the system about point R:, , ………(iii), Comparing equations (i), (ii), and (iii), we get:, ……………(iv), We infer from equation (iv) that the angular momentum of a system does not depend on the, point about which it is taken.
Page 28 :
5 Marks Questions, 1.(a) Why is moment of inertia called rotational inertia?, (b) Calculate M.I of a uniform circular disc of mass 500gm and radius 10cm about, (i) Diameter (ii) axis tangent to the disc and parallel to diameter, (c) Axis passing trough centre and perpendicular to its plane?, Ans: (a) Moment of inertia is called rotational inertia because it measures moment of inertia, during its rotational motion., (b) (i), , (ii), , (iii)
Page 29 :
2.(a) A cat is able to land on its feet after a fall. Why?, (b) If angular momentum moment of inertia is decreased, will its rotational, , be, , also conserved? Explain., Ans:(a) When cat lands to the ground, if stretches its tail as result M.I increases, As IW = constant, Angular speed will be small due to increase in moment of inertia and the cat is able to, land on its feet without any harm., (b) Let moment of inertia of a system decrease from I to I’, Then angular speed increase from w to w’, , K.E. of rotation of the system, , K.E of the system will increase. Hence it will not be conserved.
Page 30 :
3. Find the components along the x, y, z axes of the angular momentum l of a particle,, whose position vector is r with components x, y, z and momentum is p with components, , . Show that if the particle moves only in the x-y plane the angular, momentum has only a z-component., Ans., , Linear momentum of the particle,, Position vector of the particle,, , Angular momentum,, , =, , =, , Comparing the coefficients of, , we get:, , …………..(i), , The particle moves in the x-y plane. Hence, the z-component of the position vector and linear, momentum vector becomes zero, i.e.,
Page 31 :
z=, , =0, , Thus, equation (i) reduces to:, , Therefore, when the particle is confined to move in the x-y plane, the direction of angular, momentum is along the z-direction., , 4. A non-uniform bar of weight W is suspended at rest by two strings of negligible, weight as shown in Fig.7.39. The angles made by the strings with the vertical are 36.9°, and 53.1° respectively. The bar is 2 m long. Calculate the distance d of the centre of, gravity of the bar from its left end., , Ans. The free body diagram of the bar is shown in the following figure., , Length of the bar, l= 2 m
Page 32 :
and, , are the tensions produced in the left and right strings respectively., , At translational equilibrium, we have:, , For rotational equilibrium, on taking the torque about the centre of gravity, we have:, , Hence, the C.G. (centre of gravity) of the given bar lies 0.72 m from its left end., , 5.A car weighs 1800 kg. The distance between its front and back axles is 1.8 m. Its centre, of gravity is 1.05 m behind the front axle. Determine the force exerted by the level, ground on each front wheel and each back wheel., Ans. Mass of the car, m= 1800 kg
Page 33 :
Distance between the front and back axles, d= 1.8 m, Distance between the C.G. (centre of gravity) and the back axle = 1.05 m, The various forces acting on the car are shown in the following figure., , and, , are the forces exerted by the level ground on the front and back wheels, , respectively., At translational equilibrium:, , = mg, = 1800, , 9.8, , = 17640 N … (i), For rotational equilibrium, on taking the torque about the C.G., we have:, , …………..(ii), Solving equations (i) and (ii), we get:
Page 34 :
∴, , = 17640 – 7350 = 10290 N, , Therefore, the force exerted on each front wheel, , , and, , The force exerted on each back wheel, , 6. (a) Find the moment of inertia of a sphere about a tangent to the sphere, given the, moment of inertia of the sphere about any of its diameters to be, , , where M is, , the mass of the sphere and R is the radius of the sphere., (b) Given the moment of inertia of a disc of mass M and radius R about any of its, diameters to be, , , find its moment of inertia about an axis normal to the disc, , and passing through a point on its edge., Ans. (a), , The moment of inertia (M.I.) of a sphere about its diameter =, , According to the theorem of parallel axes, the moment of inertia of a body about any axis is, equal to the sum of the moment of inertia of the body about a parallel axis passing through
Page 35 :
its centre of mass and the product of its mass and the square of the distance between the two, parallel axes., The M.I. about a tangent of the sphere =, , (b), , The moment of inertia of a disc about its diameter =, , According to the theorem of perpendicular axis, the moment of inertia of a planar body, (lamina) about an axis perpendicular to its plane is equal to the sum of its moments of inertia, about two perpendicular axes concurrent with perpendicular axis and lying in the plane of, the body., The M.I. of the disc about its centre =, , The situation is shown in the given figure., , Applying the theorem of parallel axes:, The moment of inertia about an axis normal to the disc and passing through a point on its, edge =, , 7. Torques of equal magnitude is applied to a hollow cylinder and a solid sphere, both, having the same mass and radius. The cylinder is free to rotate about its standard axis, of symmetry, and the sphere is free to rotate about an axis passing through its centre.
Page 36 :
Which of the two will acquire a greater angular speed after a given time?, Ans. Let m and r be the respective masses of the hollow cylinder and the solid sphere., The moment of inertia of the hollow cylinder about its standard axis,, , The moment of inertia of the solid sphere about an axis passing through its centre,, , We have the relation:, , Where,, α = Angular acceleration, T = Torque, I = Moment of inertia, For the hollow cylinder,, , For the solid sphere,, , As an equal torque is applied to both the bodies,, , ……….(i), Now, using the relation:, , Where,
Page 37 :
= Initial angular velocity, t = Time of rotation, = Final angular velocity, For equal, , and t, we have:, , … (ii), From equations (i) and (ii), we can write:, , Hence, the angular velocity of the solid sphere will be greater than that of the hollow, cylinder., , 8. (a) A child stands at the centre of a turntable with his two arms outstretched. The, turntable is set rotating with an angular speed of 40 rev/min. How much is the angular, speed of the child if he folds his hands back and thereby reduces his moment of inertia, to 2/5 times the initial value? Assume that the turntable rotates without friction., (b) Show that the child's new kinetic energy of rotation is more than the initial kinetic, energy of rotation. How do you account for this increase in kinetic energy?, Ans.(a)100 rev/min, Initial angular velocity,, , = 40 rev/min, , Final angular velocity =, , The moment of inertia of the boy with stretched hands =, , The moment of inertia of the boy with folded hands =, , The two moments of inertia are related as:
Page 38 :
Since no external force acts on the boy, the angular momentum L is a constant., Hence, for the two situations, we can write:, , (b)Final K.E. = 2.5 Initial K.E., Final kinetic rotation,, , Initial kinetic rotation,
Page 39 :
The increase in the rotational kinetic energy is attributed to the internal energy of the boy., , 9. From a uniform disk of radius R, a circular hole of radius R/2 is cut out. The centre of, the hole is at R/2 from the centre of the original disc. Locate the centre of gravity of the, resulting flat body., Ans. R/6; from the original centre of the body and opposite to the centre of the cut portion., Mass per unit area of the original disc =, Radius of the original disc = R, Mass of the original disc, M =, , The disc with the cut portion is shown in the following figure:, , Radius of the smaller disc =, , Mass of the smaller disc, M' =, , Let O and, , be the respective centers of the original disc and the disc cut off from the, , original. As per the definition of the centre of mass, the centre of mass of the original disc is, supposed to be concentrated at O, while that of the smaller disc is supposed to be, concentrated at, It is given that:, , .
Page 40 :
=, , After the smaller disc has been cut from the original, the remaining portion is considered to, be a system of two masses. The two masses are:, M (concentrated at O), and, , concentrated at, , (The negative sign indicates that this portion has been removed from the original disc.), Let x be the distance through which the centre of mass of the remaining portion shifts from, point O., The relation between the centers of masses of two masses is given as:, , For the given system, we can write:, , (The negative sign indicates that the centre of mass gets shifted toward the left of point O.), , 10. A solid sphere rolls down two different inclined planes of the same heights but, different angles of inclination. (a) Will it reach the bottom with the same speed in each, case? (b) Will it take longer to roll down one plane than the other? (c) If so, which one, and why?
Page 41 :
Ans. (a) Yes (b)Yes (c) On the smaller inclination, (a)Mass of the sphere = m, Height of the plane = h, Velocity of the sphere at the bottom of the plane =v, At the top of the plane, the total energy of the sphere = Potential energy = mgh, At the bottom of the plane, the sphere has both translational and rotational kinetic energies., Hence, total energy =, , Using the law of conservation of energy, we can write:, ………(i), , For a solid sphere, the moment of inertia about its centre,, , Hence, equation (i) becomes:, , But we have the relation,
Page 42 :
Hence, the velocity of the sphere at the bottom depends only on height (h) and acceleration, due to gravity (g). Both these values are constants. Therefore, the velocity at the bottom, remains the same from whichever inclined plane the sphere is rolled., (b), (c) Consider two inclined planes with inclinations, , and, , , related as:, , <, , The acceleration produced in the sphere when it rolls down the plane inclined at, , is:, , g sin, , The various forces acting on the sphere are shown in the following figure., , is the normal reaction to the sphere., Similarly, the acceleration produced in the sphere when it rolls down the plane inclined at, , is:, g sin, , The various forces acting on the sphere are shown in the following figure., , is the normal reaction to the sphere., , >, , ; sin, , > sin, , ... (i)
Page 43 :
∴, , >, , … (ii), , Initial velocity, u = 0, Final velocity, v= Constant, Using the first equation of motion, we can obtain the time of roll as:, v= u + at, , 11. A solid cylinder rolls up an inclined plane of angle of inclination 30°. At the bottom, of the inclined plane the centre of mass of the cylinder has a speed of 5 m/s., (a) How far will the cylinder go up the plane?, (b) How long will it take to return to the bottom?, Ans.A solid cylinder rolling up an inclination is shown in the following figure., , Initial velocity of the solid cylinder, v = 5 m/s, Angle of inclination, θ = 30°, Height reached by the cylinder = h, (a) Energy of the cylinder at point A:
Page 44 :
Energy of the cylinder at point B = mgh, Using the law of conservation of energy, we can write:, , Moment of inertia of the solid cylinder,, , But we have the relation,, , In ΔABC:
Page 45 :
Hence, the cylinder will travel 3.82 m up the inclined plane., (b) For radius of gyration K, the velocity of the cylinder at the instance when it rolls back to, the bottom is given by the relation:, , For the solid cylinder,, , The time taken to return to the bottom is:
Page 46 :
Therefore, the total time taken by the cylinder to return to the bottom is (2, , 0.764) 1.53 s., , 12. As shown in Fig.7.40, the two sides of a step ladder BA and CA are 1.6 m long and, hinged at A. A rope DE, 0.5 m is tied half way up. A weight 40 kg is suspended from a, point F, 1.2 m from B along the ladder BA. Assuming the floor to be frictionless and, neglecting the weight of the ladder, find the tension in the rope and forces exerted by, the floor on the ladder. (Take g = 9.8, , ), , (Hint: Consider the equilibrium of each side of the ladder separately.), , Ans. The given situation can be shown as:, , NB = Force exerted on the ladder by the floor point B, NC = Force exerted on the ladder by the floor point C, T = Tension in the rope
Page 47 :
BA = CA = 1.6 m, DE = 0. 5 m, BF = 1.2 m, Mass of the weight, m = 40 kg, Draw a perpendicular from A on the floor BC. This intersects DE at mid-point H., ΔABI and ΔAIC are similar, ∴BI = IC, Hence, I is the mid-point of BC., DE || BC, BC = 2, , DE = 1 m, , AF = BA – BF = 0.4 m … (i), D is the mid-point of AB., Hence, we can write:, ………….(ii), , Using equations (i) and (ii), we get:, FE = 0.4 m, Hence, F is the mid-point of AD., FG DH and F is the mid-point of AD. Hence, G will also be the mid-point of AH., , ΔAFG and ΔADH are similar
Page 48 :
In ΔADH:, , For translational equilibrium of the ladder, the upward force should be equal to the, downward force., , = mg = 392 … (iii), For rotational equilibrium of the ladder, the net moment about A is:, , Adding equations (iii) and (iv), we get:, , For rotational equilibrium of the side AB, consider the moment about A.
Page 49 :
13. Two discs of moments of inertia, , and, , about their respective axes (normal to the, , disc and passing through the centre), and rotating with angular speeds, , and, , are, , brought into contact face to face with their axes of rotation coincident. (a) What is the, angular speed of the two-disc system? (b) Show that the kinetic energy of the combined, system is less than the sum of the initial kinetic energies of the two discs. How do you, account for this loss in energy? Take, , ≠, , ., , Ans. (a), Moment of inertia of disc, , Angular speed of disc, , Angular speed of disc, , Angular momentum of disc, , Angular momentum of disc, , Angular momentum of disc, , Total initial angular momentum,, , When the two discs are joined together, their moments of inertia get added up., Moment of inertia of the system of two discs,, , Let, , be the angular speed of the system.
Page 50 :
Total final angular momentum,, , Using the law of conservation of angular momentum, we have:, , (b)Kinetic energy of disc I,, , Kinetic energy of disc II,, , Total initial kinetic energy,, , When the discs are joined, their moments of inertia get added up., Moment of inertia of the system,, , Angular speed of the system =, Final kinetic energy, , :
Page 51 :
All the quantities on RHS are positive., , The loss of KE can be attributed to the frictional force that comes into play when the two, discs come in contact with each other., , 14. (a) Prove the theorem of perpendicular axes., (Hint: Square of the distance of a point (x, y) in the x–y plane from an axis through the, origin perpendicular to the plane is, , )., , (b) Prove the theorem of parallel axes., (Hint: If the centre of mass is chosen to be the origin, , )., , Ans.(a)The theorem of perpendicular axes states that the moment of inertia of a planar body, (lamina) about an axis perpendicular to its plane is equal to the sum of its moments of inertia, about two perpendicular axes concurrent with perpendicular axis and lying in the plane of, the body., A physical body with centre O and a point mass m, in the x–y plane at (x, y) is shown in the, following figure.
Page 52 :
Moment of inertia about x-axis, Ix=, , Moment of inertia about y-axis, Iy=, , Moment of inertia about z-axis, Iz=, , =m, , =, , Hence, the theorem is proved., (b)The theorem of parallel axes states that the moment of inertia of a body about any axis is, equal to the sum of the moment of inertia of the body about a parallel axis passing through, its centre of mass and the product of its mass and the square of the distance between the two, parallel axes.
Page 53 :
Suppose a rigid body is made up of n particles, having masses, , perpendicular distances, , , at, , respectively from the centre of mass O of the rigid, , body., The moment of inertia about axis RS passing through the point O:, , IRS=, , The perpendicular distance of mass mi, from the axis QP = a+ ri, Hence, the moment of inertia about axis QP:, , Now, at the centre of mass, the moment of inertia of all the particles about the axis passing, through the centre of mass is zero, that is,, , Also,
Page 54 :
M=Total mass of the rigid body, , Hence, the theorem is proved., , 15. Prove the result that the velocity v of translation of a rolling body (like a ring, disc,, cylinder or sphere) at the bottom of an inclined plane of a height h is given by, , ., , Using dynamical consideration (i.e. by consideration of forces and torques). Note k is, the radius of gyration of the body about its symmetry axis, and R is the radius of the, body. The body starts from rest at the top of the plane., Ans. A body rolling on an inclined plane of height h, is shown in the following figure:, , m= Mass of the body, R = Radius of the body, K= Radius of gyration of the body, v = Translational velocity of the body, h =Height of the inclined plane, g = Acceleration due to gravity, Total energy at the top of the plane,, , =mgh, , Total energy at the bottom of the plane,
Page 55 :
But, , From the law of conservation of energy, we have:, , Hence, the given result is proved., , 16. A disc rotating about its axis with angular speed, , is placed lightly (without any, , translational push) on a perfectly frictionless table. The radius of the disc is R. What, are the linear velocities of the points A, B and C on the disc shown in Fig. 7.41? Will the, disc roll in the direction indicated?
Page 56 :
Ans., , =R, , ;, , =R, , ;, , ; The disc will not roll, , Angular speed of the disc =, , Radius of the disc = R, Using the relation for linear velocity, v =, , R, , For point A:, , =R, , ; in the direction tangential to the right, , For point B:, , =R, , ; in the direction tangential to the left, , For point C:, , ;in the direction same as that of, , The directions of motion of points A, B, and C on the disc are shown in the following figure
Page 57 :
Since the disc is placed on a frictionless table, it will not roll. This is because the presence of, friction is essential for the rolling of a body., , 17. A solid disc and a ring, both of radius 10 cm are placed on a horizontal table, simultaneously, with initial angular speed equal to 10 π rad, , start to roll earlier? The co-efficient of kinetic friction is, , . Which of the two will, , = 0.2., , Ans. Disc, Radii of the ring and the disc, r = 10 cm = 0.1 m, Initial angular speed,, , =10 π rad, , Coefficient of kinetic friction,, , = 0.2, , Initial velocity of both the objects, u = 0, Motion of the two objects is caused by frictional force. As per Newton's second law of motion,, we have frictional force, f = ma, , mg= ma, Where,, a = Acceleration produced in the objects, m = Mass, ∴a =, , g … (i), , As per the first equation of motion, the final velocity of the objects can be obtained as:
Page 58 :
v = u + at, =0+, , =, , gt, , gt … (ii), , The torque applied by the frictional force will act in perpendicularly outward direction and, cause reduction in the initial angular speed., Torque, T= –Iα, α = Angular acceleration, , =–Iα, , …………….(iii), , Using the first equation of rotational motion to obtain the final angular speed:, , ………(iv), , Rolling starts when linear velocity, v = r, , ………(v), , Equating equations (ii) and (v), we get:, , …….(vi)
Page 59 :
………….(vii), , ……………(viii), , Since, , , the disc will start rolling before the ring., , 18. A cylinder of mass 10 kg and radius 15 cm is rolling perfectly on a plane of, inclination 30°. The coefficient of static friction, , = 0.25., , (a) How much is the force of friction acting on the cylinder?
Page 60 :
(b) What is the work done against friction during rolling?, (c) If the inclination, , of the plane is increased, at what value of, , does the cylinder, , begin to skid, and not roll perfectly?, Ans. Mass of the cylinder, m= 10 kg, Radius of the cylinder, r= 15 cm = 0.15 m, Co-efficient of kinetic friction,, , = 0.25, , Angle of inclination, θ= 30°, Moment of inertia of a solid cylinder about its geometric axis,, , The various forces acting on the cylinder are shown in the following figure:, , The acceleration of the cylinder is given as:, , (a) Using Newton's second law of motion, we can write net force as:, , = ma
Page 61 :
(b) During rolling, the instantaneous point of contact with the plane comes to rest. Hence, the, work done against frictional force is zero., (c) For rolling without skid, we have the relation:, , 19. Separation of Motion of a system of particles into motion of the centre of mass and, motion about the centre of mass:, (a) Show, , Where pi is the momentum of the I th particle (of mass mi) and, , is, , the velocity of the I th particle relative to the centre of mass., Also, prove using the definition of the centre of mass, , (b) Show K =, , Where K is the total kinetic energy of the system of particles,, , is the total kinetic, , energy of the system when the particle velocities are taken with respect to the centre of, mass and, , is the kinetic energy of the translation of the system as a whole (i.e., , of the centre of mass motion of the system). The result has been used in Sec.7.14.
Page 62 :
(c) Show, , Where, , is the angular momentum of the system about the centre of, , mass with velocities taken relative to the centre of mass . Remember, , of the notation is the standard notation used in the chapter. Note, , rest, and, , can, , be said to be angular momenta, respectively, about and of the centre if mass of the, system of particles., , (d) Show, , Further show that, , Where, , is the sum of all external torques acting on the system about the centre of, , mass., (Hint: Use the definition of centre of mass and Newton’s Third Law. Assume the, internal forces between any two particles act along the line joining the particles.), Ans. (a)Take a system of i moving particles., Mass of the ith particle =, , Velocity of the ith particle =, , Hence, momentum of the ith particle,, , Velocity of the centre of mass = V, The velocity of the ith particle with respect to the centre of mass of the system is given as:, , … (1), Multiplying, , throughout equation (1), we get:
Page 63 :
Where,, , = Momentum of the ith particle with respect to the centre of mass of the system, , We have the relation:, , Taking the summation of momentum of all the particles with respect to the centre of mass of, the system, we get:, , Where,, , = Position vector of its particle with respect to the centre of mass, , As per the definition of the centre of mass, we have:, , (b) We have the relation for velocity of the particle as:
Page 64 :
… (2), Taking the dot product of equation (2) with itself, we get:, , Here, for the centre of mass of the system of particles,, , Where, K =, , K' =, , = Total kinetic energy of the system of particles, , = Total kinetic energy of the system of particles with respect to the centre of, , mass, = Kinetic energy of the translation of the system as a whole