Page 1 :
CBSE Class 9 Science, Revision Notes, CHAPTER - 12, Sound, , 1, Production of Sound Sound is produced due to the vibration of objects. Vibration is the, rapid to and fro motion of an object., , Vibrating objects are the source of all sounds Irregular, chaotic vibrations produce noise, Regular, controlled vibration can produce music. All sound is a combination of pure, frequencies. A stretched rubber band when plucked vibrates and produces sound., , 2. Propagation of Sound When an object vibrates, the particles around the medium vibrate., The particle in contact with the vibrating object is first displaced from its equilibrium, position., , The disturbance produced by the vibrating body travels through the medium but the, particles do not move forward themselves., , A wave is a disturbance which moves through a medium by the vibration of the particles of, the medium. So sound is considered as a wave. Sound waves Require medium for, transmission., , , , When a vibrating object moves forward, it, pushes and compresses the air in front of it forming a region of high pressure called, compression (C). When the vibrating object moves backward, it forms a region of low, , pressure called rarefaction(R)., Ui n, (9) emu Sm, , vu © |i MMM, , nme ome ae Sound Is longitudinal wave motion, , , , , , A vibrating object producing a series of compressions (C) and rarefaction (R)
Page 2 :
In these waves the particles move back and forth parallel to the direction of propagation of, the disturbance. Such waves are called longitudinal waves., , There is another kind of waves called transverse waves. In these waves the particles, oscillate up and down perpendicular to the propagation of the direction of disturbance., , Sound propagates in a medium as a series of compressions (C) and rare factions (R)., , Compressions are the regions of high pressure and density where the particles are crowded, andare represented by the upper portion of the curve called crest., , Rarefactions are the regions of low pressure and density where the particles are spread out, and are represented by the lower portion of the curve called trough, , Characteristics of a sound wave, , | wavelength { wavelength |, , , , Pressure ——», , rarefaction, , , , , , reque’ sound wave, , The number of oscillations per unit time is called the frequency of the sound wave. It is, represented by the symbol v (Greek letter nu). Its SI unit is hertz (Hz), , Time period of sound wave:, The time taken by wave to complete one oscillation is called time-period., Frequency and time are represented as follows :, V for one oscillation
Page 3 :
= + or V= +, , Amplitude of sound wave, , The amplitude of sound wave is the height of the crest or tough., It is represented by the letter A., , The SI unit is the same as that of density or pressure., , 8 Wavelength, , € ? Ampitude, , Wave disturba, , Wavelength and Amplitude, The wavelength is the distance between the "crests" of two waves that are next to each other., The amplitude is how high the crests are., , Pitch and loudness of sound, , The pitch of sound (shrillness or flatness) depends on the frequency of vibration., , If the frequency is high, the sound has high pitch and if the frequency is low, the sound has, low pitch, , Speed of sound, The speed of sound is more in solids, less in liquids and least in gases., , The speed of sound also depends on the temperature of the medium. If the temperature of, the medium is more, the speed of sound is more, , 3. Reflection of Sound, Sound gets reflected at the surface of a solid or liquid and follows the laws of reflection., , 1. The angle of incidence is equal to the angle of reflection.
Page 4 :
2. The incident ray, the reflected ray and normal at the point of incidence all lie in the same, plane., , , , Refiection of sound bom s pane suttace, , 4. Echo, , If we shout or clap near a reflecting surface like tall building or a mountain, we hear the, same sound again. This sound which we hear is called echo. It is caused due to the reflection, of sound. To hear an echo clearly, the time interval between the original sound and the echo, must be at least 0.1 s., , Since the speed of sound in air is 344 m/s, the distance travelled by sound in 0.1 s = 344, , m/sx0.1s = 34.4 m. Soto hear an echo clearly, the minimum distance of the reflecting, surface should be half this distance that is 17.2 m., , Reverberation, , Echoes may be heard more than once due to repeated or multiple reflections of sound from, several reflecting surfaces. This causes persistence of sound called reverberation., , In big halls or auditoriums to reduce reverberation, the roofs and walls are covered by, sound absorbing materials like compressed fibre boards, rough plaster or draperies., , 5. Uses of Multiple Reflection Of Sound, , i) Megaphones, horns, musical instruments like trumpets, etc. are deigned to send sound by, multiple reflection in a particular direction without spreading in all directions., , ii) Doctors listen to sounds from the human body through a stethoscope. The sound of, heartbeat reaches the doctor’s ears by multiple reflection., , iii) Generally the ceilings of cinema halls and auditoriums are curved so that sound after
Page 5 :
multiple reflection reaches all parts of the hall. Sometimes a curved sound board is placed, behind the stage so that sound after multiple reflection spreads evenly across the hall., , 6. Range of Hearing, , Human beings can hear sound frequencies between 20 Hz and 2000 Hz., called as audible, range of sound., , Sound whose frequency is less than 20 Hz is called infrasonic sound, Sound whose frequency is more than 2000 Hz is called ultrasonic sound, 7. Uses of ultrasonic sound, , Ultrasonic sound is used to clean objects like electronic Components, used to detect cracks in, metal blocks, used in ultra sound scanners for getting images of internal organs of the, human body used to break small stones formed in the kidneys into fine grains., , 8. Sonar, , It is a device which uses ultrasonic waves to measure distance, direction and speed of, underwater objects. The distance of the object can be calculated by knowing the speed of, sound in water and the time taken between the transmission and reception of ultrasound, , , , 9.Structure of the human ear
